- Go to the Trip Log page and select the first trip onto the Map page by tapping its preview map.
- Place the crosshair ⊹ on the track line where you want to start copying the track. Tap the measure tool button.
- Tap the route mode button and select 'Along Track From Trip Log'.
- Place the crosshair ⊹ at the end of the desired section and tap the route + button. Trail Boss will copy the selected section from the first trip into the measure tool.
- Go to the Trip Log and select the second trip onto the map.
- Place the crosshair ⊹ on the track line where you want to start copying the track from the second trip. Tap the route + button.
- Place the crosshair ⊹ at the end of the desired section and tap the route + button. Trail Boss will copy the selected section from the second trip into the measure tool.
- Repeat from step 5 to merge more trips/sections into the measure tool.
- When you are done, tap the measure tool button and select 'Save'. The combined route will be saved to a new trip the top of the Trip Log.
You can get creative and add multiple sections from a single trip, or add an entire trip by selecting the trip start and end points with the crosshair ⊹.