Can I merge 2 or more trips together?

Post by **bruce@handylogic.ca** » Thu May 28, 2020 8:26 pm

You can merge trips or parts of trips into a new trip using the measure tool.

Go to the Trip Log page and select the first trip onto the Map page by tapping its preview map.
Place the crosshair ⊹ on the track line where you want to start copying the track. Tap the measure tool button.
Tap the route mode button and select 'Along Track From Trip Log'.
Place the crosshair ⊹ at the end of the desired section and tap the route + button. Trail Boss will copy the selected section from the first trip into the measure tool.
Go to the Trip Log and select the second trip onto the map.
Place the crosshair ⊹ on the track line where you want to start copying the track from the second trip. Tap the route + button.
Place the crosshair ⊹ at the end of the desired section and tap the route + button. Trail Boss will copy the selected section from the second trip into the measure tool.
Repeat from step 5 to merge more trips/sections into the measure tool.
When you are done, tap the measure tool button and select 'Save'. The combined route will be saved to a new trip the top of the Trip Log.

When you add a track section it will be connected to the previous section with a straight line. If you want to leave a gap between sections then after step 5 tap the route mode button and select 'Leave a Gap' then continue with step 6.

You can get creative and add multiple sections from a single trip, or add an entire trip by selecting the trip start and end points with the crosshair ⊹.